选择语言:
联系我们
  • 地 址:深圳市罗湖爱国路新丰大厦裙楼西侧三楼
    电 话:0755-22659006
    传 真:0755-36625828 
    邮 箱:jiebangren@163.com


JM328高效石材防护剂
  • 点击数:5897
  • 产品类别: 产品中心 产品分类 绿色建筑材料 商业清洁系列 净魅系列
  • 产品描述:
  • 品名:高效石材防护剂

    型号:JM328

    品牌:净魅

    规格:1L

    产品简介:净魅JM328高效石材防护剂是一款油溶型石材防护剂,采用优质的进口氟硅原料,主要活性成分是纳米级小分子氟硅混合物,具有优异的防水、防油、防污的效果。适用面广,适合所有天然和人造石材,如花岗岩、大理石、石英石、岗石、砂岩、板岩、石膏板、陶砖和混凝土等。深入渗透至各种质地的矿物基材中,不会在表面形成薄膜及改变外观颜色,耐酸碱,耐紫外线,耐高低温,常用于各种高档装饰石材,尤其是卫浴厨房台面板和地铺石材的防污保护。


    适用范围:

    适用于任何石材,特别用于砂石、烧面花岗石。

    使用方法:

    1. 直接用布或扫均匀将JM328涂在无油、无尘、无蜡、无水份的石面。让防护剂渗入石孔。

    2.在处理面初干时( 渗透时间视乎处理面的密度及天气情况而定),用棉布沾少量的JM328将剩余物抹去,以防止本品质聚而形成斑点或污斑。

    3.一小时后重复扫上JM328可获得更佳效果,其覆盖范围8-10平方米/每公升(视具体石材情况)24小时后能作全面性保护。

    注意事项:

    1.石材表面温度低于4℃或超过35℃不宜施工。

    2.开启后立即使用,暴露在有水分的空气中可能使其在容器中结晶或膨胀。

    3.禁止在施工现场吸烟;请在通风良好,远离火花或明火的地方储存和使用。

    4.致密石材涂刷量过多,未及时拭去残余,表面会有结晶影响美观。

    5.避免沾染皮肤或触及眼睛,放置在儿童触摸不到的地方。

    保质期:3


    其他规格:5L20L



    Net enchantment JM328 high efficiency stone protection agent is an oil soluble stone protective agent, using high quality imported fluorosilicone raw material, the main active ingredient is nanoscale small molecule fluorosilicone mixture. It has excellent waterproof, oil proof and antifouling effect. 

    It is suitable for all natural and man-made stones, such as granite, marble, quartzite, granite, sandstone, slate, plasterboard, pottery brick and concrete. Deep penetration to various texture of mineral materials, not to form a film on the surface and change the appearance of color, acid and alkali resistance, UV resistance, high and low temperature, often used in all kinds of high-grade decorative stone, especially the bathroom kitchen panel and floor stone protection.
    Scope of application:
    It is suitable for any stone, especially for sandstone and granite.
    Usage method:
    1., directly use cloth or sweep evenly, apply JM328 to oil-free, dustless, non wax and water free stone surface. Let the protective agent infiltrate into the stone hole.
    2. when the surface of the surface is treated (the penetration time depends on the density of the processing surface and the weather conditions), the residue is erased with a small amount of JM328 on the cotton cloth to prevent the quality from forming spots or stains.
    3., an hour later, scanning JM328 will get better results. The coverage will be 8-10 square meters / liter (depending on the specific stone conditions). It can be fully protected after 24 hours.
    Matters needing attention:
    1. stone surface temperature below 4 C or over 35 C is not suitable for construction.
    2., when opened, it can be used immediately and exposed to moisture air, which may cause it to crystallize or expand in containers.
    3. prohibit smoking in the construction site; please store and use it well ventilated, away from sparks or open fires.
    4., too much dense stone brush is not enough to wipe away the residue in time. The surface will have crystal effect and beautiful appearance.
    5., avoid staining the skin or touching the eyes, placed in places where children can't touch.

版权所有 Copyright(C)2014-2018 深圳市洁邦天下科技有限公司  粤ICP备15019507号

扫描一下